Product name: Zamak furniture handle
Product Number: 6005
Manufactured by: Wenzhou Leya Metal Hareware.Co.,Ltd
The subsidiary of Sumer (Beijing) International Trading Co.,Ltd
Type: Simple style
Material: Zamak (Zinc alloy)
Usage: Cabinet,drawer, dresser kitchen or other furniture hardware use.
Color: Gold,Silver,Bronze and others
Surface :Satin Nickel/Chrome Plated (Special color negotiable)
Central space: 96 / 128 mm (special spec negotiable)
Weight: 41-103 g (for your reference)
Good quality and reasonable price.
Directly from Factory;
Customers’ design welcome;
Major Alloy Characteristics
ZAMAK 2: This is the strongest and hardest ZAMAK alloy. Generally
die cast, it is occasionally employed for gravity casting. ZAMAK 2
is not the widely used.
ZAMAK 3: This is the most used general purpose zinc die casting
alloy, providing an excellent combination of strength, ductility
and impact strength. It also provides excellent plating and
finishing characteristics. This alloy is the designer's first
choice for die casting applications.
ZAMAK 5: ZAMAK 5 should be considered when moderately greater
hardness, strength and creep resistance over ZAMAK 3 is required.
ZAMAK 7: this is a high purity for of ZAMAK 3 with similar
mechanical properties. However, ZAMAK 7 has higher ductility (for
forming bending operations) and the highest casting fluidity of the
ZA-8: This should be the first choice when considering die casting
the ZA family, due to its cost effective hot chamber castability.
ZA-8 provides improved performance characteristics over the ZAMAK
alloys. Plating and finishing characteristics are similar. ZA-8 can
also be sand or permanent mold cast.
ZA-12: This is the preferred alloy for permanent mold applications,
although it can also be cal-chamber die cast with excellent
results. It combines low temperature melting efficiency and thin
wall capabilities with premium mechanical properties. ZA-12 should
be used when switching from cast iron or permanent molded aluminum.
ZA-21 can usually be poured directly into molds designed for
aluminum and brass.
ZA-27: Components requiring optimum strength, hardness and light
weight should be specified using ZA-27. With over double the yield
strength of die cast A380 aluminum and 25% lighter than ZAMAK 3,
this is definitely the high performance member of the group. ZA-27
also offers excellent bearing properties, comparable to those of
EZAC: Eastern Alloy's newest commercially available alloy. EZAC is
the strongest, hardest and most creep resistant die casting alloy
available, and can be cast in the "hot-chamber" die casting
Cabinets which rest on the floor are supported by some base. This
base could be a fully enclosed base (i.e. a plinth), a scrolled
based, bracket feet or it could be a set of legs.
A type of adjustable leg has been adopted from the European cabinet
system which offers several advantages. First off, in making base
cabinets for kitchens, the cabinet sides would be cut to 34½
inches, yielding four cabinet side blanks per 4 foot by 8 foot
sheet. Using the adjustable feet, the side blanks are cut to 30
inches, thus yielding six cabinet side per sheet.
6005 same size different color
6005 different size cabinet hardware
gold color side view